To display the content appropriate for your location, we have set the country to: , language: EN. You can continue with these settings or change them.
Change Continue

Accessories

We offer an extensive range of accessories that facilitate the installation and use of our products.

Accessories

Appropriate insulation increases heat exchanger performance, preventing interactions between the equipment and its direct surroundings.

The purpose of thermal insulation is to reduce energy losses and protect the devices against freezing and internal corrosion. Insulation also protects the environment against overheating due to operation of the exchanger and protects against accidentally touching a heated device. Cooling exchangers use cold protective insulation, protecting them against ambient temperature, which is higher than the temperature of the cooling medium.

JAD insulations L insulations JAG F and F insulations

PFI insulation for JAD exchangers

Insulation for shell and tube JAD heat exchangers is made of polyurethane foam. The two parts of the insulation are joined with bands, which facilitates their installation and disassembly.

Technical parameters:

  • max. operating temperature: +135°C
  • thickness: 30 mm
  • heat conductivity: 0.024 W/mK
PFI insulation for JAD exchangers

AMWI insulation for JAD exchangers

Insulation for shell and tube JAD heat exchangers is made of mineral wool covered with aluminum. Parts of the insulation are joined using fasteners, facilitating its installation.

Technical parameters:

  • max. operating temperature: +250°C
  • thickness: 30 mm
  • heat conductivity: 0.035 W/mK

Attention! The insulation may also withstand 350°C.

AMWI insulation for JAD exchangers

APFI for L exchangers

Insulation for brazed plate L-line heat exchangers is made of polyurethane insulation foam covered with aluminum (APF). The two parts of insulation are combined using fasteners.

Technical parameters:

  • insulating material: polyurethane foam
  • coating material: aluminum sheet, stucco
  • thickness: 30 mm
  • heat conductivity: 0.026 W/mK
  • maximum operating temperature: +135°C
  • density: 35±10% kg/m3
  • flammability class: F as per the PN-EN ISO 11925; B3 as per the DIN 4102
  • fasteners: galvanized steel
APFI for L exchangers

EPPI insulation for L exchangers

Expanded polypropylene (EPP) insulation for L brazed plate heat exchanger in LB31 model is resistant to diffusion, 100% free of contamination. Importantly, it is completely recyclable.

Technical parameters:

  • insulating material: EPP (expanded polypropylene)
  • color: silver-grey
  • thickness: 28 mm
  • heat conductivity: 0.035 W/mK (10°C)
  • maximum operating temperature: +110°C
  • flammability class: B2 acc. To DIN 4102, E acc. TO en 13501-1
  • weight: 0.235 kg
  • density: 45-55 kg/m3
EPPI insulation for L exchangers

RNI insulation for R exchangers

Cold insulation for R heat exchangers is made of self-adhesive elastomer foam, ideally fitted to the exchanger surface.

Technical parameters:

  • operating temperature: -40°C to +110°C
  • thickness: 20 mm
  • heat conductivity: 0.037 W/mK
RNI insulation for R exchangers

AMWI insulation for JAG F and F plate & frame exchangers

Insulation for plate & frame exchangers made of mineral wool covered with aluminum. Parts of the insulation are joined using fasteners, facilitating its installation.

Technical parameters:

  • max. operating temperature: +580°C
  • thickness: 30 mm
  • heat conductivity: 0.038 W/mK
AMWI insulation for JAG F and F plate & frame exchangers

Thanks to the use of mounting supports the exchanger weight is supported by a frame structure or the floor, thus removing load from the system.

JAD mounts L mounts

JAD X MNT mounts

JAD X exchanger mounts are made of stainless steel.

JAD X MNT mounts

JAD MNT mounts

JAD exchanger mounts are made of stainless steel.

JAD MNT mounts

Mounts for brazed plate exchangers

made of stainless steel or galvanized carbon steel.

  • LA MNT – for LA exchangers
  • LB MNT – for LB exchangers
  • LM MNT – for LM exchangers
Mounts for brazed plate exchangers

Mounts for brazed plate exchangers

MNT LC/LD – mounts for LC and brazed place exchangers, made of stainless steel or galvanized carbon steel.

Mounts for brazed plate exchangers

Fittings for welding

Fittings for welding are used in exchangers with connector pipes to be welded. Its parts are made of carbon steel and brass.

Fittings

Threaded fittings

Threaded fittings made of brass are used for mounting exchanger equipped with threaded connection pipes for installation.

Threaded

RDS refrigerant distribution system

Hexonic developed the unique dynamic boiling medium distribution system, RDS, for evaporators with higher cooling efficiencies. RDS distribution tubes are used in type R brazed plate heat exchangers. The system ensures balanced medium distribution in evaporator channels, while at the same time reducing steam overheating fluctuations.

RDS

Professional deSCAL descaler

deSCAL descaling agent is a modern formula efficiently removing the limescale.

deSCAL is a safe chemical agent intended for removing limescale from heat exchangers, domestic hot water tanks, boilers, central heating installations and other devices generating limescale.

The limescale results from thermal decomposition of calcium and magnesium carbonates contained in water, especially hard water. Its regular removal is necessary for the proper operation of heat exchangers, allowing to preserve heat exchange efficiency. In the worst case scenario, excessive generation of limescale may lead to fouling of the exchanger. deSCAL agent is very economic; 1.5 kg of the agent is used per 1m2 of heat exchange surface.

Professional

deSCAL NX 100 cleaning unit

deSCAL NX 100 cleaning unit is designed to remove limescale from devices using deSCAL cleaning agent.

It has a very simple design, is functional and has an attractive price. Made entirely of plastic, is very light (only 5.7 kg), which makes it easy in transport and use.

deSCAL NX100 is intended for chemical cleaning of devices such as: heat exchangers, gas boiler exchangers made of stainless steel, steel gas boilers or cast iron insert boilers, tanks, heat pump exchangers, smaller chiller’s evaporators and condensers.

deSCAL

Drip trays

The main function of a drip tray is to collect condensate generated outside the exchanger plate pack. It is used mainly with plate & frame heat exchangers.

Drip

Protection sheets

Protection sheets protect the sides of the heating plate pack in plate & frame heat exchangers. Their function is to protect the surroundings of the exchangers against sudden leakage of hot or toxic media.

Protection

Bolts

Threaded bolts allow for installation of a flanged connection in a plate & frame heat exchanger.

Bolts

Select the type of contact

Cairo Softwere

Easy selection of the heat exchanger thanks to the Cairo Selection Software

Go to CAIRO
Go to Contact

Do you have questions concerning our products?

Go to Contact

Newsletter

Product and technological news
Send
Dziękujemy! Skontaktujemy się niebawem!